DIY Portable Lumber Rack
A few weeks ago opened the garage door and decided I had hit my boiling point with my scrap wood pile. Out of impulse I pulled it all out into the driveway and through together something quick to help organize it and this is how it turned out.
I posted this lumber rack on Facebook and Instagram with the call to action that if enough folks wanted the plans I would put some together with my “I wish I would have done it this way” mods.
After building this rack I realized a few things I would have done differently had I taken the time to lay it out like I normally do. So here are the plans for how I wish I would have built it.
Lucky for all of us, Katie over at Addicted 2 DIY needed a lumber rack and was nice enough to not only take photos of the rack but she also put together a post, so make sure you head on over to check out her build photos! Enjoy!
Required Tools
- Pocket Hole Jig
- Drill
- Miter Saw
- Tape Measure
- Pencil
- Safety Glasses
- Hearing Protection
Materials
- 4x 2 x 4 x 96″ Premium Studs; Spruce-Pine-Fir
- 4x 3″ Casters
- 2-1/2″ Kreg Pocket Hole Screws (Coarse)
- 2-1/2″ Wood Screws
Dimensions
Cut List
How to build a portable lumber rack
Credit – http://rogueengineer.com/diy-portable-lumber-rack-plans/